|
|
 |
| Features | Overview | Key benefits | Target application areas | Implementation Information | Ordering Information |
|
Features:
- Class 1 Bluetooth version 2.0
- Range in excess of 300 metres
- High Performance ceramic patch antenna
- Temperature range -40ºC to +85 ºC
- Data transfer rate up to 300 kbps
- On board voltage regulator
- 3.3v UART
- Simple AT style command set control
- Multipoint support
- Transmit power +6dBm
- Support for 128 bit encryption
- 40 way Hirose connector
- Fully approved end product
- Field upgradeable
- Receive sensitivity better than -84 dB
- two 8 bit ADCs, 9 GPIOs
- Supports co-located Wi-Fi
- Adaptive frequency hopping
- PCM supported for audio SCO +ESCO
- Size 25x35x10mm
- Lead free - RoHS compliant
- 2 year warranty
Overview:
The EZURiO Intelligent Bluetooth Serial Module is specifically designed for companies wanting to add short range wireless connectivity to their products. It provides the fastest route to market by incorporating a complete, pre-qualified Bluetooth stack and profiles, along with a simple AT command based programming interface! Key Benefits:
- fastest time to market
- no host stack required
- support for encryption and authentication
- low power
- excellent immunity to interference from adaptive frequency hopping
- ideal for embedded systems
- lowest cost of ownership
Target application areas:
- automotive
- healthcare
- ePOS
- logistics
Implementation:
| Feature |
Implementation |
| Output Power |
Class 1 |
| Frequency |
2.400 – 2.485 GHz |
| Max Transmit Power |
+6dBm |
| Min Transmit Power |
-27dBm |
| Low power sniff mode |
2.5mA typ |
| Receive Sensitivity |
Better than -84dB |
| Range |
300M |
| Data Transfer rate |
Up to 300Kbps |
| Serial Interface |
RS-232 bi-directional for Commands and data |
| Serial parameters |
Default 9600,n,8,1 Configurable from 1200 to 921600bps DTR, DSR, DCD , RI , RTS, CTS |
| Physical size |
25 x 35 x 10 mm, 8g |
| Fully Bluetooth qualified |
Bluetooth 2.0 |
| Current consumption |
Less than 36mA |
| Temperature Range |
-40°C to +85°C |
| Interface Levels |
3.3V |
| Audio |
supported |
| Multipoint |
supported |
| Field upgradeable |
Over UART |
| Protocols |
UART | AT command set |
| GPIO |
8 x digital | 2 x analogue |
| ADC |
2 x 8bit |
| RoHS Compliant |
yes |
Ordering Information:
| Part Number |
Description |
Firmware Version |
| TRBLU23-00200-03 |
BISM II rev 3 Firmware lead free |
Version 2.11.0 |
| TRBLU23-00300-01 |
BISM2 with standard AT firmware and miniature U.FL connector for an external antenna |
Version 2.11.0 |
|
|
|
|
|
Features:
- Class 1 Bluetooth version 2.0
- Range in excess of 300 metres
- High Performance ceramic patch antenna
- Temperature range -40ºC to +85 ºC
- Data transfer rate up to 300 kbps
- On board voltage regulator
- 3.3v UART
- Simple AT style command set control
- Multipoint support
- Transmit power +6dBm
- Support for 128 bit encryption
- 40 way Hirose connector
- Fully approved end product
- Field upgradeable
- Receive sensitivity better than -84 dB
- two 8 bit ADCs, 9 GPIOs
- Supports co-located Wi-Fi
- Adaptive frequency hopping
- PCM supported for audio SCO +ESCO
- Size 25x35x10mm
- Lead free - RoHS compliant
- 2 year warranty
Overview:
The EZURiO Intelligent Bluetooth Serial Module is specifically designed for companies wanting to add short range wireless connectivity to their products. It provides the fastest route to market by incorporating a complete, pre-qualified Bluetooth stack and profiles, along with a simple AT command based programming interface! Key Benefits:
- fastest time to market
- no host stack required
- support for encryption and authentication
- low power
- excellent immunity to interference from adaptive frequency hopping
- ideal for embedded systems
- lowest cost of ownership
Target application areas:
- automotive
- healthcare
- ePOS
- logistics
Implementation:
| Feature |
Implementation |
| Output Power |
Class 1 |
| Frequency |
2.400 – 2.485 GHz |
| Max Transmit Power |
+6dBm |
| Min Transmit Power |
-27dBm |
| Low power sniff mode |
2.5mA typ |
| Receive Sensitivity |
Better than -84dB |
| Range |
300M |
| Data Transfer rate |
Up to 300Kbps |
| Serial Interface |
RS-232 bi-directional for Commands and data |
| Serial parameters |
Default 9600,n,8,1 Configurable from 1200 to 921600bps DTR, DSR, DCD , RI , RTS, CTS |
| Physical size |
25 x 35 x 10 mm, 8g |
| Fully Bluetooth qualified |
Bluetooth 2.0 |
| Current consumption |
Less than 36mA |
| Temperature Range |
-40°C to +85°C |
| Interface Levels |
3.3V |
| Audio |
supported |
| Multipoint |
supported |
| Field upgradeable |
Over UART |
| Protocols |
UART | AT command set |
| GPIO |
8 x digital | 2 x analogue |
| ADC |
2 x 8bit |
| RoHS Compliant |
yes |
Ordering Information:
| Part Number |
Description |
Firmware Version |
| TRBLU23-00200-03 |
BISM II rev 3 Firmware lead free |
Version 2.11.0 |
| TRBLU23-00300-01 |
BISM2 with standard AT firmware and miniature U.FL connector for an external antenna |
Version 2.11.0 |
Implementation:
| Feature |
Implementation |
| Output Power |
Class 1 |
| Frequency |
2.400 – 2.485 GHz |
| Max Transmit Power |
+6dBm |
| Min Transmit Power |
-27dBm |
| Low power sniff mode |
2.5mA typ |
| Receive Sensitivity |
Better than -84dB |
| Range |
300M |
| Data Transfer rate |
Up to 300Kbps |
| Serial Interface |
RS-232 bi-directional for Commands and data |
| Serial parameters |
Default 9600,n,8,1 Configurable from 1200 to 921600bps DTR, DSR, DCD , RI , RTS, CTS |
| Physical size |
25 x 35 x 10 mm, 8g |
| Fully Bluetooth qualified |
Bluetooth 2.0 |
| Current consumption |
Less than 36mA |
| Temperature Range |
-40°C to +85°C |
| Interface Levels |
3.3V |
| Audio |
supported |
| Multipoint |
supported |
| Field upgradeable |
Over UART |
| Protocols |
UART | AT command set |
| GPIO |
8 x digital | 2 x analogue |
| ADC |
2 x 8bit |
| RoHS Compliant |
yes |
Features:
- Class 1 Bluetooth version 2.0
- Range in excess of 300 metres
- High Performance ceramic patch antenna
- Temperature range -40ºC to +85 ºC
- Data transfer rate up to 300 kbps
- On board voltage regulator
- 3.3v UART
- Simple AT style command set control
- Multipoint support
- Transmit power +6dBm
- Support for 128 bit encryption
- 40 way Hirose connector
- Fully approved end product
- Field upgradeable
- Receive sensitivity better than -84 dB
- two 8 bit ADCs, 9 GPIOs
- Supports co-located Wi-Fi
- Adaptive frequency hopping
- PCM supported for audio SCO +ESCO
- Size 25x35x10mm
- Lead free - RoHS compliant
- 2 year warranty
Overview:
The EZURiO Intelligent Bluetooth Serial Module is specifically designed for companies wanting to add short range wireless connectivity to their products. It provides the fastest route to market by incorporating a complete, pre-qualified Bluetooth stack and profiles, along with a simple AT command based programming interface! Key Benefits:
- fastest time to market
- no host stack required
- support for encryption and authentication
- low power
- excellent immunity to interference from adaptive frequency hopping
- ideal for embedded systems
- lowest cost of ownership
Target application areas:
- automotive
- healthcare
- ePOS
- logistics
Ordering Information:
| Part Number |
Description |
Firmware Version |
| TRBLU23-00200-03 |
BISM II rev 3 Firmware lead free |
Version 2.11.0 |
| TRBLU23-00300-01 |
BISM2 with standard AT firmware and miniature U.FL connector for an external antenna |
Version 2.11.0 |
Target application areas:
- automotive
- healthcare
- ePOS
- logistics
Features:
- Class 1 Bluetooth version 2.0
- Range in excess of 300 metres
- High Performance ceramic patch antenna
- Temperature range -40ºC to +85 ºC
- Data transfer rate up to 300 kbps
- On board voltage regulator
- 3.3v UART
- Simple AT style command set control
- Multipoint support
- Transmit power +6dBm
- Support for 128 bit encryption
- 40 way Hirose connector
- Fully approved end product
- Field upgradeable
- Receive sensitivity better than -84 dB
- two 8 bit ADCs, 9 GPIOs
- Supports co-located Wi-Fi
- Adaptive frequency hopping
- PCM supported for audio SCO +ESCO
- Size 25x35x10mm
- Lead free - RoHS compliant
- 2 year warranty
Overview:
The EZURiO Intelligent Bluetooth Serial Module is specifically designed for companies wanting to add short range wireless connectivity to their products. It provides the fastest route to market by incorporating a complete, pre-qualified Bluetooth stack and profiles, along with a simple AT command based programming interface! Key Benefits:
- fastest time to market
- no host stack required
- support for encryption and authentication
- low power
- excellent immunity to interference from adaptive frequency hopping
- ideal for embedded systems
- lowest cost of ownership
Implementation:
| Feature |
Implementation |
| Output Power |
Class 1 |
| Frequency |
2.400 – 2.485 GHz |
| Max Transmit Power |
+6dBm |
| Min Transmit Power |
-27dBm |
| Low power sniff mode |
2.5mA typ |
| Receive Sensitivity |
Better than -84dB |
| Range |
300M |
| Data Transfer rate |
Up to 300Kbps |
| Serial Interface |
RS-232 bi-directional for Commands and data |
| Serial parameters |
Default 9600,n,8,1 Configurable from 1200 to 921600bps DTR, DSR, DCD , RI , RTS, CTS |
| Physical size |
25 x 35 x 10 mm, 8g |
| Fully Bluetooth qualified |
Bluetooth 2.0 |
| Current consumption |
Less than 36mA |
| Temperature Range |
-40°C to +85°C |
| Interface Levels |
3.3V |
| Audio |
supported |
| Multipoint |
supported |
| Field upgradeable |
Over UART |
| Protocols |
UART | AT command set |
| GPIO |
8 x digital | 2 x analogue |
| ADC |
2 x 8bit |
| RoHS Compliant |
yes |
Ordering Information:
| Part Number |
Description |
Firmware Version |
| TRBLU23-00200-03 |
BISM II rev 3 Firmware lead free |
Version 2.11.0 |
| TRBLU23-00300-01 |
BISM2 with standard AT firmware and miniature U.FL connector for an external antenna |
Version 2.11.0 |
Key Benefits:
- fastest time to market
- no host stack required
- support for encryption and authentication
- low power
- excellent immunity to interference from adaptive frequency hopping
- ideal for embedded systems
- lowest cost of ownership
Features:
- Class 1 Bluetooth version 2.0
- Range in excess of 300 metres
- High Performance ceramic patch antenna
- Temperature range -40ºC to +85 ºC
- Data transfer rate up to 300 kbps
- On board voltage regulator
- 3.3v UART
- Simple AT style command set control
- Multipoint support
- Transmit power +6dBm
- Support for 128 bit encryption
- 40 way Hirose connector
- Fully approved end product
- Field upgradeable
- Receive sensitivity better than -84 dB
- two 8 bit ADCs, 9 GPIOs
- Supports co-located Wi-Fi
- Adaptive frequency hopping
- PCM supported for audio SCO +ESCO
- Size 25x35x10mm
- Lead free - RoHS compliant
- 2 year warranty
Overview:
The EZURiO Intelligent Bluetooth Serial Module is specifically designed for companies wanting to add short range wireless connectivity to their products. It provides the fastest route to market by incorporating a complete, pre-qualified Bluetooth stack and profiles, along with a simple AT command based programming interface! Target application areas:
- automotive
- healthcare
- ePOS
- logistics
Implementation:
| Feature |
Implementation |
| Output Power |
Class 1 |
| Frequency |
2.400 – 2.485 GHz |
| Max Transmit Power |
+6dBm |
| Min Transmit Power |
-27dBm |
| Low power sniff mode |
2.5mA typ |
| Receive Sensitivity |
Better than -84dB |
| Range |
300M |
| Data Transfer rate |
Up to 300Kbps |
| Serial Interface |
RS-232 bi-directional for Commands and data |
| Serial parameters |
Default 9600,n,8,1 Configurable from 1200 to 921600bps DTR, DSR, DCD , RI , RTS, CTS |
| Physical size |
25 x 35 x 10 mm, 8g |
| Fully Bluetooth qualified |
Bluetooth 2.0 |
| Current consumption |
Less than 36mA |
| Temperature Range |
-40°C to +85°C |
| Interface Levels |
3.3V |
| Audio |
supported |
| Multipoint |
supported |
| Field upgradeable |
Over UART |
| Protocols |
UART | AT command set |
| GPIO |
8 x digital | 2 x analogue |
| ADC |
2 x 8bit |
| RoHS Compliant |
yes |
Ordering Information:
| Part Number |
Description |
Firmware Version |
| TRBLU23-00200-03 |
BISM II rev 3 Firmware lead free |
Version 2.11.0 |
| TRBLU23-00300-01 |
BISM2 with standard AT firmware and miniature U.FL connector for an external antenna |
Version 2.11.0 |
Overview:
The EZURiO Intelligent Bluetooth Serial Module is specifically designed for companies wanting to add short range wireless connectivity to their products. It provides the fastest route to market by incorporating a complete, pre-qualified Bluetooth stack and profiles, along with a simple AT command based programming interface! Features:
- Class 1 Bluetooth version 2.0
- Range in excess of 300 metres
- High Performance ceramic patch antenna
- Temperature range -40ºC to +85 ºC
- Data transfer rate up to 300 kbps
- On board voltage regulator
- 3.3v UART
- Simple AT style command set control
- Multipoint support
- Transmit power +6dBm
- Support for 128 bit encryption
- 40 way Hirose connector
- Fully approved end product
- Field upgradeable
- Receive sensitivity better than -84 dB
- two 8 bit ADCs, 9 GPIOs
- Supports co-located Wi-Fi
- Adaptive frequency hopping
- PCM supported for audio SCO +ESCO
- Size 25x35x10mm
- Lead free - RoHS compliant
- 2 year warranty
Key Benefits:
- fastest time to market
- no host stack required
- support for encryption and authentication
- low power
- excellent immunity to interference from adaptive frequency hopping
- ideal for embedded systems
- lowest cost of ownership
Target application areas:
- automotive
- healthcare
- ePOS
- logistics
Implementation:
| Feature |
Implementation |
| Output Power |
Class 1 |
| Frequency |
2.400 – 2.485 GHz |
| Max Transmit Power |
+6dBm |
| Min Transmit Power |
-27dBm |
| Low power sniff mode |
2.5mA typ |
| Receive Sensitivity |
Better than -84dB |
| Range |
300M |
| Data Transfer rate |
Up to 300Kbps |
| Serial Interface |
RS-232 bi-directional for Commands and data |
| Serial parameters |
Default 9600,n,8,1 Configurable from 1200 to 921600bps DTR, DSR, DCD , RI , RTS, CTS |
| Physical size |
25 x 35 x 10 mm, 8g |
| Fully Bluetooth qualified |
Bluetooth 2.0 |
| Current consumption |
Less than 36mA |
| Temperature Range |
-40°C to +85°C |
| Interface Levels |
3.3V |
| Audio |
supported |
| Multipoint |
supported |
| Field upgradeable |
Over UART |
| Protocols |
UART | AT command set |
| GPIO |
8 x digital | 2 x analogue |
| ADC |
2 x 8bit |
| RoHS Compliant |
yes |
Ordering Information:
| Part Number |
Description |
Firmware Version |
| TRBLU23-00200-03 |
BISM II rev 3 Firmware lead free |
Version 2.11.0 |
| TRBLU23-00300-01 |
BISM2 with standard AT firmware and miniature U.FL connector for an external antenna |
Version 2.11.0 |
Ordering Information:
| Part Number |
Description |
Firmware Version |
| TRBLU23-00200-03 |
BISM II rev 3 Firmware lead free |
Version 2.11.0 |
| TRBLU23-00300-01 |
BISM2 with standard AT firmware and miniature U.FL connector for an external antenna |
Version 2.11.0 |
Features:
- Class 1 Bluetooth version 2.0
- Range in excess of 300 metres
- High Performance ceramic patch antenna
- Temperature range -40ºC to +85 ºC
- Data transfer rate up to 300 kbps
- On board voltage regulator
- 3.3v UART
- Simple AT style command set control
- Multipoint support
- Transmit power +6dBm
- Support for 128 bit encryption
- 40 way Hirose connector
- Fully approved end product
- Field upgradeable
- Receive sensitivity better than -84 dB
- two 8 bit ADCs, 9 GPIOs
- Supports co-located Wi-Fi
- Adaptive frequency hopping
- PCM supported for audio SCO +ESCO
- Size 25x35x10mm
- Lead free - RoHS compliant
- 2 year warranty
Overview:
The EZURiO Intelligent Bluetooth Serial Module is specifically designed for companies wanting to add short range wireless connectivity to their products. It provides the fastest route to market by incorporating a complete, pre-qualified Bluetooth stack and profiles, along with a simple AT command based programming interface! Key Benefits:
- fastest time to market
- no host stack required
- support for encryption and authentication
- low power
- excellent immunity to interference from adaptive frequency hopping
- ideal for embedded systems
- lowest cost of ownership
Target application areas:
- automotive
- healthcare
- ePOS
- logistics
Implementation:
| Feature |
Implementation |
| Output Power |
Class 1 |
| Frequency |
2.400 – 2.485 GHz |
| Max Transmit Power |
+6dBm |
| Min Transmit Power |
-27dBm |
| Low power sniff mode |
2.5mA typ |
| Receive Sensitivity |
Better than -84dB |
| Range |
300M |
| Data Transfer rate |
Up to 300Kbps |
| Serial Interface |
RS-232 bi-directional for Commands and data |
| Serial parameters |
Default 9600,n,8,1 Configurable from 1200 to 921600bps DTR, DSR, DCD , RI , RTS, CTS |
| Physical size |
25 x 35 x 10 mm, 8g |
| Fully Bluetooth qualified |
Bluetooth 2.0 |
| Current consumption |
Less than 36mA |
| Temperature Range |
-40°C to +85°C |
| Interface Levels |
3.3V |
| Audio |
supported |
| Multipoint |
supported |
| Field upgradeable |
Over UART |
| Protocols |
UART | AT command set |
| GPIO |
8 x digital | 2 x analogue |
| ADC |
2 x 8bit |
| RoHS Compliant |
yes |
|
ResourcesDocumentation
Hardware
Software
Getting Started
Product Engineering
Application Notes
Developer's Resources
White Papers
Alternative Products
Firmware
Latest NewsWireless LAN Processor Modules now offer AT and web Configuration Options for Simple Wi-Fi Transition Laird Technologies Announces New Extreme Mesh Technology for Harsh Environments and Extreme Distance Applications EZURiO Introduces New Intelligent Dual Processor 802.11 Modules EZURiO latest white paper explains the need for platforms in M2M
Registration
Developers can also register here to get access to new designs and firmware
|
